Technoseal Damp Proof Paint provides a waterproof membrane, used for water-proofing walls. Technoseal DPM is fast drying and can be applied to sound masonry by brush, roller or spray. Non-toxic, non-hazardous and solvent free liquid damp proof membrane suitable for walls both above and below ground.
Floors: Under/above screeds to provide a damp proof membrane.
Basements: As part of a waterproofing system beneath ground level.
Walls: Can be used under render or plaster as a water barrier or vapour barrier.
Tiling: As secondary protection under tiles in wet areas e.g. bathrooms, food processing areas, balconies, etc.
Water Storage: The membranes perform well in our tests even when continuously immersed in water.
Silage Storage: The membrane protects concrete from silage attack.
Single pack system
Water based compounds that can be applied even to damp backgrounds
Non-toxic, non hazardous, solvent and plasticiser free
Good bond to many substrates
Toughness, high flexibility, extensibility and good crack bridging properties
Low water vapour permeability
Alkali resistant, can be applied to alkaline surfaces
Resistant to silage acids
Non staining and stain blocking
Available in a range of colours
Quick drying. Typically touch dry in 1 hour
A minimum dried coating thickness of 0.6mm is needed to provide a physical barrier. This should be applied in a minimum of two coats (i.e 0.3mm per dried coat) This corresponds to approx 1.2kg/m².
For enquiries, contact:
Category: Interior Decorators and Designers Supplies and Accessories - Ernakulam
Contact: ABDUL SULHAR T K
S.R.M. Rd Enk North-682018. Phone: 0484-2405801